您所在的位置: 主页 > 成功案例 > RAID数据恢复 > 逻辑故障恢复案例 >

如何把双控SureSAS112存储柜设置为单控?

来源:未知点击数:更新时间:2015-12-10

问题描述:

 
如何把双控SureSAS112存储柜设置为单控?
 
 
解决方案:
 
首先把主柜上的B控制器(下面的)拔出,然后开启主柜电源,等待几秒后,利用终端登录,用户和密码为:manage和!manage。
 
输入如下命令:
 
restore defaults factory
 
FACTORY DEFAULTS: WARNING! ALL configuration for this array controller will be E
 
RASED. This is intended for engineer use only. The Management Controller will re
 
start once this is completed. Are you sure? y
 
Waiting for the other Management Controller to restore defaults ...
 
The Local Storage Controller was reset to default settings.
 
Applying persisted defaults ...
 
Error: The restore-defaults operation failed on the remote MC. - The event log w
 
as successfully cleared.

当显示successfully  cleared后说明双控变单控成功。当系统正常后在web界面下登录系统,则看到图中标记的已经变为single状态了!